How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add the second key. This requires the use of a handheld computer, known as Tech-2 which is to be used by the dealer. Then a new car key and transponder need to be bought and then programmed to the car.
It is a good idea to rotate your keys in order that one does not get damaged faster than the other. This will keep your keys in good condition.
Replacement Case
Unlike the classic Saab keys of old keys, the modern key fobs contain electronics that make it difficult to create a duplicate. This has made car theft considerably more difficult than it was years ago. It also makes it more expensive to replace keys lost.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one is lost it is expensive to purchase a new one for the car since it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to reduce these costs. Certain parts suppliers will utilize the code of an old key to cut a new metal blade at a fraction the price of the dealer. The key must be exactly the identical to the original one for it to function in your vehicle.
Follow these steps to replace the case. saab replacement keys uk G28 Car Keys 'll require a flathead screwdriver and some patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. When the case is opened remove all electronics and put them in your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. This YouTube video from Cyclone Cyd shows how to replace the battery for the remote fob in just four easy steps. This tutorial should work for any modern saab key fob, however the procedure might differ slightly.
This button is usually located next to the Saab logo on the back of the fob. It's usually near the Saab logo on the back of the fob. Next use a flathead screwdriver into the small hole inside this button. This will allow you to open the case of the fob to allow you to replace the battery.
Once the new CR1632 battery is in place then you can reassemble your remote key fob and then program it to your car. The entire process should not be more than an hour. It is a very simple process that does not require any special equipment.
The process is more complicated if you've lost your key, but still possible. The dealer will need to read the car's VIN and then request a replacement key blade and TWICE module, both with the proper unique code. After that, they will have to cut the new key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is equipped with batteries that are used to lock and unlock your car. The batteries are able to last for that is a long time, and they eventually go out of service. This is a problem that happens to all cars and the good thing is that you can change the batteries in most fobs, without replacing the whole case. You can purchase fobs replacements on Amazon that come with all the electronics already in place, so you'll simply open the case and replace the batteries in the original case. It is important to note that you will need to remove the emergency key first, and you can do this by putting the screwdriver of a small flathead into the slot that is located in the middle of the case. The case will split when you turn the screwdriver around it.
When you are ready to replace the keys make sure you have a spare because this can cut down your total cost by a substantial amount. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is less expensive than buying a new key fob.
If you don't have a spare you can add another key to your car, but this requires a lot research and effort. The cost for adding a second key is several hundred dollars and it also requires programming of the car's computer. This can be done by a professional, but it is an expensive option for most owners.
Replacement Ignition
Unlike the earlier Saab automobiles, the new SAAB 9-3 models feature an extremely sophisticated alarm system that is based on a coded key. This means that when you lose your sole functioning key, getting an additional one could be extremely costly since the car needs to have a specific computer module fitted and also needs to be specifically programmed to accept a new key. Even dealers can charge hundreds of dollars to program a new key even if they're unable to do it.
If you've lost only one working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make a replacement, and they will charge you the highest price for it. Instead we can reprogram the EEPROM of your current car computer to prepare it for a new key, and save you over 50% of the amount you pay at a dealership.
If you have owned a car like the SAAB 9-3 for quite a while and you're aware of the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to fall off of them every now and then It is recommended that you consider replacing your ignition key if it isn't functioning properly. Luckily, replacing the ignition key isn't as difficult as it seems and is fairly easy to do using the proper tools.